🔑 Gate.io hesabı açın
👨💼 24 saat içinde KYC (Müşterini Tanı) işlemlerini tamamlayın
🎁 Puan Ödüllerini Alın
Tüm cihazlar
Tüm terminal hesaplarından APP/PC/WAP'den çıkın
Bu cihaz
Mevcut web hesabından çıkın
Gate Blog
Kripto haberlerine ve içgörülerine Açılan Kapınız
What is Isolated Margin & Cross Margin | Crypto Futures
02 December 18:46
Q : Let's study Logical Mechanism of Perpetual Contracts today.
A : Sure let's get started.
Q : Here we go, Can you tell me about Isolated Margin &Amp; Cross Margin ?
A : Sure, Magin refers to the principal that users need when participating in contract trading and opening a position.
Since the contract has the attribute of high leverage, that users can trade with a larger finance scale while holding the same amount of principal.
Leverage has the characteristic of magnifying PNL.
With the same amount of principal, the higher the leverage, the larger scale of the position can be opened. Relatively, the users may face a higher risk.
Likewise, when holding the same position, the higher the leverage, the lower the amount of margin is required, and the higher the risk is.
There are 2 margin modes on Gate.io: Isolated Margin Mode and Cross Margin Mode.
Isolated Margin
Under the isolated margin mode, there is a fixed value of the position margin. It starts with the initial margin which can be changed by adjusting the leverage, risk limit, and withdrawal margin. When the margin balance is lower than the maintaining margin, a forced liquidation will be triggered. At this point, the position margin could be the largest loss for the users.
The calculation of the Isolated margin is as follows :
Initial Isolated Margin = (Position Value / Leverage) + Fee to Close
( When there's an unrealized PNL and under a loss-making circumstance, the abs should be added to the margin under the Isolated Margin mode. )
For example:
User A is currently at the position worth of 100USDT by using 100X leverage, when the unrealized PNL is -0.5USDT, then the margin is calculated as:
100/100+100*0.075%+|-0.5|=1.575USDT
Cross Margin
Under the cross margin mode, all balance in the user's account is used as the margin. Users can set up multiple contract positions as crossing margin mode, in which all positions can share the account balance. However, the unrealized PNL cannot be used as a margin for other positions.
Initial Cross Margin = Position Value * Initial Margin Ratio + Fee to Close
( When there's an unrealized PNL and under a loss-making circumstance, the abs should be added to the margin under the Cross Margin mode. )
*The Initial Margin Ratio can be viewed in the Contract Details.
For example:
User B is currently at the position worth of 100USDT by using full leverage, with an initial margin ratio of 1%, 200U of balance, and unrealized PNL +10USDT, the margin is calculated as:
100*1%+100*0.075%=1.075USDT
that the margin shown in the position is 1.075USDT, and the actual position margin is 200USDT.
Q : Does anything user need to be noted ?
A :
1)In one-way positions, isolated margin and cross margin are interchangeable anytime while holding positions; while in a two-way position, they are not interchangeable.
2)Under cross margin mode, the trader cannot manually select the leverage. In fact, the leverage is affected by the margin, position value, and unrealized PNL.
3)The leverage will not affect the unrealized PNL.
Şansınızı Kutusundan Çıkarın ve $6666 Ödül Kazanın
Hemen Kaydol
Hemen 20 Puanı alın
Yeni Kullanıcıya Özel: Puanları hemen talep etmek için 2 adımı tamamlayın!
Hemen Alın
